Unboxing & assembly

From the box
to your first ride.

Your bike arrives professionally packed and almost completely assembled. Three simple steps: open the box, assemble the bike, fit the pedals. Then you ride.

Your bike arrives professionally packed and almost completely assembled. Three simple steps and you ride.

Start with step 1 What's in the box

What's in the box

Open it up and everything has its place. Here's what you'll find, and the only tools you'll need.

Your bikeAlmost fully assembled, protected everywhere
Small parts boxPedals, spacers & accessories
ProtectionsWrap and foam you can keep or recycle
Tools you'll need
(Not included in Base Kit)Allen keys and a 15 mm pedal wrench

Two steps to your first ride

Most of the work is already done before the box reaches you. Take your time: the whole build takes about fifteen minutes.

1

Open the box

Give yourself some space and keep the box upright. The packaging does its job until the bike is out.

  • Cut the tape with shallow cuts and never push the blade deep
  • Open the flaps and lift the bike out together with its foam inlays
  • Remove wrap and guards, then set the small parts box aside
2

Assemble your bike

The frame arrives with most components already fitted. You only finish the cockpit and the front end.

Bike type
  • Straighten the handlebar and tighten the stem bolts evenly
  • Fit the front wheel and close the thru axle or quick release firmly
  • Insert the seatpost to your height and mind the minimum insert mark

Before your first ride

One minute, every time.

  • Tyre pressure
  • Brakes bite
  • Axles & pedals tight
  • Saddle height